Woods Hole Oceanographic Institution
Cruise Planning Synopsis
AT26-09 | |
Ship | |
| R/V Atlantis | |
Vehicles | |
| AUV Sentry, ROV Jason | |
| - added ROV Jason on Aug 7, 2013 9:16 AM by Eric Benway | |
| - added AUV Sentry on Aug 7, 2013 9:16 AM by Eric Benway | |
Cruise Party | |
| Andrew Fisher: Principal Investigator, Principal Investigator, Principal Investigator, Principal Investigator UCSC 1156 High Street Santa Cruz, CA USA 95064 +1 831 459 5598 Samuel Hulme: Principal Investigator Moss Landing Marine Laboratory USA +1 831 359 1907 samiam0101@gmail.com Geoffrey Wheat: Principal Investigator, Chief Scientist University of Alaska Fairbanks P.O. BOX 757200 Fairbanks, AK USA 99775 +1 831 633 7033 wheat@mbari.org | |
| - added Geoffrey Wheat as Chief Scientist on Aug 7, 2013 9:16 AM by Eric Benway | |
| - added Andrew Fisher as Principal Investigator on Aug 7, 2013 9:16 AM by Eric Benway | |
| - added Andrew Fisher as Principal Investigator on Aug 7, 2013 9:16 AM by Eric Benway | |
| - added Andrew Fisher as Principal Investigator on Aug 7, 2013 9:16 AM by Eric Benway | |
| - added Andrew Fisher as Principal Investigator on Aug 7, 2013 9:16 AM by Eric Benway | |
| - added Samuel Hulme as Principal Investigator on Aug 7, 2013 9:16 AM by Eric Benway | |
| - added Geoffrey Wheat as Principal Investigator on Aug 7, 2013 9:16 AM by Eric Benway |
Departure: Dec 7, 2013 | |
| Puntarenas, Costa rica | |
Arrival: Dec 23, 2013 | |
| Puntarenas, Costa Rica | |
Operations Area | |
| 86 to 88 degrees west 8 to 10 degrees north (TicoFlux site) and CR CORKs | |
| - 86 to 88 degrees west 8 to 10 degrees north (TicoFlux site) and CR CORKs on Aug 7, 2013 9:16 AM by Eric Benway | |
| Lat/Lon: 9° 0.0′ N / 87° 0.0′ W | |
| - set lat to 9° 0.0′ N, set lon to 87° 0.0′ W on Aug 7, 2013 9:16 AM by Eric Benway | |
| Depth Range: 3000 / 4500 | |
| - set min to 3000, set max to 4500 on Aug 7, 2013 9:16 AM by Eric Benway | |
| Will the vessel be operating within 200 NM of a foreign country? | Costa Rica |
| - Costa Rica on Aug 7, 2013 9:16 AM by Eric Benway | |
| Are visas or special travel documents required? | no |
| - set to no on Aug 7, 2013 9:16 AM by Eric Benway | |
Science Objectives | |
Intellectual Merit: Scientific Motivation and Proposed Program Most of the advective heat loss from the oceanic lithosphere occurs on "ridge flanks”, areas far from the magmatic influence of seafloor spreading. Global hydrothermal fluid flows to and from the seafloor on ridge flanks, driven by lithospheric cooling and influenced by basement relief and variations in sediment thickness, are of the same magnitude as the flows from all of Earth's rivers and streams to the oceans. Yet, pristine fluids from a typical ridge-flank hydrothermal system have never been sampled, mainly because it has not been possible to locate a site of focused discharge where representative samples could be collected. We have located a small basement feature, Dorado outcrop, on 23 m.y.-old seafloor on the eastern flank of the East Pacific Rise, that is hypothesized to discharge 103–104 L/s of cool (10–20°C) hydrothermal fluid that carries 200-350 MW of lithospheric heat, equivalent to the heat output of a black-smoker vent field. We propose to sample this fluid to determine its composition, and to assess the rate of discharge from Dorado outcrop, so that we can quantify the chemical impact of this hydrothermal system. The physical and chemical state of this fluid is typical of fluids that extract heat from the crust and exchange solutes with the overlying ocean across much of the seafloor. Collection of uncontaminated samples from this feature will provide the most accurate estimates of the global impact of ridge-flank hydrothermal circulation. We anticipate that this fluid will be modestly different in composition from bottom seawater, which is why collection of pristine samples is so important, because of the relatively low temperatures of reaction and short residence time of the fluid within basaltic basement. Despite being slightly altered, fluid of this kind can have a large influence on the geochemical budgets of important solutes in the ocean because the flows are so large (from both Dorado outcrop and on a global basis). We propose an 18-day expedition that combines the surveying capabilities of the AUV Sentry (bathymetric, sub-bottom sonar, photo mosaics, water column anomalies) and an ocean-class vessel capable of collecting high-quality multi-beam data and CTD samples, and supporting the survey and sampling capabilities of the ROV Jason II for collection of spring and plume fluids, heat flow data, sediment push cores, and still and video photography. These data and samples will be combined to generate the first well-constrained estimates of hydrothermal flows from Dorado outcrop. This single expedition will result in the collection of samples and data from a “fire hose” of ridge-flank, hydrothermal system, challenging the commonly held view that discharge from ridge flank hydrothermal systems occurs primarily from diffuse seeps.
Broader Impacts Undergraduate and graduate students and a junior faculty member (Hulme) will gain experience by participating in this program and through the development of ROV manipulated samplers and sensors. Results of this work will be broadcast in publications, theses, presentations (to scientific and lay audiences), and in K-16 curriculum development. The P.I.s have strong histories of involvement in educational and outreach programs at multiple levels. Wheat and Hulme are developing hands-on science-technology packages to engage K-8 students during week-long learning opportunities that include three technology-based activities per grade level and meet national science, mathematics, and language arts standards. Fisher will involve university students through USCS’s Institute for Scientist and Engineering Educators and Cal Teach programs. Wheat and Fisher are involved in the NSF-funded Science Technology Center for Dark Energy Biosphere Investigations (C-DEBI). Materials from this expedition will be incorporated in C-DEBI education and outreach activities, reaching a diverse audience that includes K-8 students in the Los Angeles area. | |
| - Intellectual Merit: Scientific Motivation and Proposed Program Most of the advective heat loss from the oceanic lithosphere occurs on "ridge flanks”, areas far from the magmatic influence of seafloor spreading. Global hydrothermal fluid flows to and from the seafloor on ridge flanks, driven by lithospheric cooling and influenced by basement relief and variations in sediment thickness, are of the same magnitude as the flows from all of Earth's rivers and streams to the oceans. Yet, pristine fluids from a typical ridge-flank hydrothermal system have never been sampled, mainly because it has not been possible to locate a site of focused discharge where representative samples could be collected. We have located a small basement feature, Dorado outcrop, on 23 m.y.-old seafloor on the eastern flank of the East Pacific Rise, that is hypothesized to discharge 103–104 L/s of cool (10–20°C) hydrothermal fluid that carries 200-350 MW of lithospheric heat, equivalent to the heat output of a black-smoker vent field. We propose to sample this fluid to determine its composition, and to assess the rate of discharge from Dorado outcrop, so that we can quantify the chemical impact of this hydrothermal system. The physical and chemical state of this fluid is typical of fluids that extract heat from the crust and exchange solutes with the overlying ocean across much of the seafloor. Collection of uncontaminated samples from this feature will provide the most accurate estimates of the global impact of ridge-flank hydrothermal circulation. We anticipate that this fluid will be modestly different in composition from bottom seawater, which is why collection of pristine samples is so important, because of the relatively low temperatures of reaction and short residence time of the fluid within basaltic basement. Despite being slightly altered, fluid of this kind can have a large influence on the geochemical budgets of important solutes in the ocean because the flows are so large (from both Dorado outcrop and on a global basis). We propose an 18-day expedition that combines the surveying capabilities of the AUV Sentry (bathymetric, sub-bottom sonar, photo mosaics, water column anomalies) and an ocean-class vessel capable of collecting high-quality multi-beam data and CTD samples, and supporting the survey and sampling capabilities of the ROV Jason II for collection of spring and plume fluids, heat flow data, sediment push cores, and still and video photography. These data and samples will be combined to generate the first well-constrained estimates of hydrothermal flows from Dorado outcrop. This single expedition will result in the collection of samples and data from a “fire hose” of ridge-flank, hydrothermal system, challenging the commonly held view that discharge from ridge flank hydrothermal systems occurs primarily from diffuse seeps.
Broader Impacts Undergraduate and graduate students and a junior faculty member (Hulme) will gain experience by participating in this program and through the development of ROV manipulated samplers and sensors. Results of this work will be broadcast in publications, theses, presentations (to scientific and lay audiences), and in K-16 curriculum development. The P.I.s have strong histories of involvement in educational and outreach programs at multiple levels. Wheat and Hulme are developing hands-on science-technology packages to engage K-8 students during week-long learning opportunities that include three technology-based activities per grade level and meet national science, mathematics, and language arts standards. Fisher will involve university students through USCS’s Institute for Scientist and Engineering Educators and Cal Teach programs. Wheat and Fisher are involved in the NSF-funded Science Technology Center for Dark Energy Biosphere Investigations (C-DEBI). Materials from this expedition will be incorporated in C-DEBI education and outreach activities, reaching a diverse audience that includes K-8 students in the Los Angeles area. on Aug 7, 2013 9:16 AM by Eric Benway | |
Science Activities | |
WHOI support personnel estimate 8 hours of bottom time for a complete bathymetry survey of Dorado outcrop (216,000 m2/hr), yielding a processed map with 20-30 cm resolution. Subbottom penetrating sonar and water column thermal and eH surveys will be completed simultaneously and continuously during bathymetric mapping. The initial bathymetric map will guide additional Sentry dives to collect additional bathymetric and sediment thickness data on and surrounding the outcrop; should it be necessary, additional higher altitude (50 m) mapping of the outcrop perimeter will be conducted to ensure complete bathymetric and subbottom coverage of the outcrop and adjacent sediments. Sentry also will be used to conduct photographic surveys 5 meters above the seafloor (5400 m2/hr) during which we will monitor for thermal and chemical anomalies in the water column. WHOI personnel expect to mount a new strobe system in late 2011 or early 2012 on Sentry, and have indicated that the entire outcrop can be visually surveyed in about seven days of operation (includes battery recharging, etc) at an elevation of 5 m with this new strobe system. It may not be necessary to image the entire outcrop, but we will focus photo-mosaic operations on sites of interest for closer evaluation, and run repeat surveys at multiple altitudes to define better the distribution and size of water column anomalies. Jason II deployments will be guided using the initial bathymetric map and data collected with Sentry to locate and sample springs and hydrothermal plumes at/near the seafloor, and to conduct heat flow and sediment push core surveys on sedimented areas on Dorado outcrop and along the outcrop edge. Sentry and Jason II can work concurrently provided they are 300 m apart. Thus, after the initial day of mapping with Sentry, 6 days of bottom time (8 operating days) with Jason II are required to conduct six radial heat flow surveys along transects defined by the sub-bottom sonar and bathymetric data (each measurement takes 0.5 hours with 1.5 hours to take a push core, transit and set-up for the next measurement. Twelve measurements will be made on each survey, with transects oriented radially away from the edge of the outcrop). The combination of sediment pore water and heat flow data will allow quantification of hydrothermal fluxes, as described above. Four additional days of bottom time (6 operating days) are needed to sample springs using inverted funnels, barrels, or short “pipes” [e.g., Johnson et al., 2003] that minimize entrainment of bottom seawater during sampling. In aggregate, we can complete outcrop-wide mapping, water column surveys, sonar data acquisition, heat flow measurements, and seafloor sampling in 18 days on site, including one day for the initial map, eight days to conduct heat flow transects, six days to sample springs, one day for CTD operations to collect additional fluid samples near the seafloor, one day for vehicle timing (coordinating vehicles in/out of water) and maintenance, and one day for weather/contingency. In summary Sentry - will map Dorado Outcrop and possibly another nearby oucrop (Bathymetry, eH, temperature anomaly, chirp sonar, and likely photo mosaic Jason - will conduct heat flow and push core surveys. When springs are found we will collect spring fluids, rocks, mats, clams (if any). The springs should be 10 to 20 C. | |
| - WHOI support personnel estimate 8 hours of bottom time for a complete bathymetry survey of Dorado outcrop (216,000 m2/hr), yielding a processed map with 20-30 cm resolution. Subbottom penetrating sonar and water column thermal and eH surveys will be completed simultaneously and continuously during bathymetric mapping. The initial bathymetric map will guide additional Sentry dives to collect additional bathymetric and sediment thickness data on and surrounding the outcrop; should it be necessary, additional higher altitude (50 m) mapping of the outcrop perimeter will be conducted to ensure complete bathymetric and subbottom coverage of the outcrop and adjacent sediments. Sentry also will be used to conduct photographic surveys 5 meters above the seafloor (5400 m2/hr) during which we will monitor for thermal and chemical anomalies in the water column. WHOI personnel expect to mount a new strobe system in late 2011 or early 2012 on Sentry, and have indicated that the entire outcrop can be visually surveyed in about seven days of operation (includes battery recharging, etc) at an elevation of 5 m with this new strobe system. It may not be necessary to image the entire outcrop, but we will focus photo-mosaic operations on sites of interest for closer evaluation, and run repeat surveys at multiple altitudes to define better the distribution and size of water column anomalies. Jason II deployments will be guided using the initial bathymetric map and data collected with Sentry to locate and sample springs and hydrothermal plumes at/near the seafloor, and to conduct heat flow and sediment push core surveys on sedimented areas on Dorado outcrop and along the outcrop edge. Sentry and Jason II can work concurrently provided they are 300 m apart. Thus, after the initial day of mapping with Sentry, 6 days of bottom time (8 operating days) with Jason II are required to conduct six radial heat flow surveys along transects defined by the sub-bottom sonar and bathymetric data (each measurement takes 0.5 hours with 1.5 hours to take a push core, transit and set-up for the next measurement. Twelve measurements will be made on each survey, with transects oriented radially away from the edge of the outcrop). The combination of sediment pore water and heat flow data will allow quantification of hydrothermal fluxes, as described above. Four additional days of bottom time (6 operating days) are needed to sample springs using inverted funnels, barrels, or short “pipes” [e.g., Johnson et al., 2003] that minimize entrainment of bottom seawater during sampling. In aggregate, we can complete outcrop-wide mapping, water column surveys, sonar data acquisition, heat flow measurements, and seafloor sampling in 18 days on site, including one day for the initial map, eight days to conduct heat flow transects, six days to sample springs, one day for CTD operations to collect additional fluid samples near the seafloor, one day for vehicle timing (coordinating vehicles in/out of water) and maintenance, and one day for weather/contingency. In summary Sentry - will map Dorado Outcrop and possibly another nearby oucrop (Bathymetry, eH, temperature anomaly, chirp sonar, and likely photo mosaic Jason - will conduct heat flow and push core surveys. When springs are found we will collect spring fluids, rocks, mats, clams (if any). The springs should be 10 to 20 C. on Aug 7, 2013 9:16 AM by Eric Benway | |
Additional Info | |
| Pre-cruise Planning Meeting: Teleconference | |
| - Teleconference on Aug 7, 2013 9:16 AM by Eric Benway | |
| - on Aug 7, 2013 9:16 AM by Eric Benway | |
Stations: | |
| Dorado Outcrop Distance: 100 Days: 10 Latitude: 87° 7.0’ N Longitude: 9° 5.0’ W ODP Hole 1253A Distance: 50 Days: 1.5 Latitude: 9° 38.858’ N Longitude: 86° 11.434’ W ODP Hole 1255A Distance: 1 Days: 1.5 Latitude: 9° 39.272’ N Longitude: 86° 11.149’ W Tico Flux Outcrops and Seamounts Distance: 20 Days: 3 Latitude: 9° N Longitude: 87° W Tengosed Outcrop Distance: 10 Days: 2 Latitude: 9° 10.0’ N Longitude: 87° 0.0’ W TicoFlux Outcrop area 8-10 N and 86 to 88 W Distance: null Days: null Latitude: Longitude: | |
| - added Name: Dorado Outcrop, Lat: 87° 7.0’ N, Lon: 9° 5.0’ W, Distance: 100, Days: 10 added Name: ODP Hole 1253A, Lat: 9° 38.858’ N, Lon: 86° 11.434’ W, Distance: 50, Days: 1.5 added Name: ODP Hole 1255A, Lat: 9° 39.272’ N, Lon: 86° 11.149’ W, Distance: 1, Days: 1.5 added Name: Tico Flux Outcrops and Seamounts, Lat: 9° N, Lon: 87° W, Distance: 20, Days: 3 added Name: Tengosed Outcrop, Lat: 9° 10.0’ N, Lon: 87° 0.0’ W, Distance: 10, Days: 2 added Name: TicoFlux Outcrop area 8-10 N and 86 to 88 W, Lat: , Lon: , Distance: , Days: on Aug 7, 2013 9:16 AM by Eric Benway | |
Supporting documentation: | |
| »Atlantis_Working_Decks_WHEAT.jpg | |
| »Dorado_things_we_need_.xls | |
| »jason_initial_dive_plan_for_CR__CORKs_2013.xls | |
| »Initial_basket_configuration.pptx | |
| »Dorado_Proposed_crusie_tracks.pptx.pdf | |
| - added Atlantis_Working_Decks_WHEAT.jpg on Sep 10, 2013 2:09 PM by Eric Benway | |
| - added Dorado_things_we_need_.xls on Aug 8, 2013 11:19 AM by Eric Benway | |
| - added jason_initial_dive_plan_for_CR__CORKs_2013.xls on Aug 8, 2013 11:19 AM by Eric Benway | |
| - added Initial_basket_configuration.pptx on Aug 8, 2013 11:19 AM by Eric Benway | |
| - added Dorado_Proposed_crusie_tracks.pptx.pdf on Aug 7, 2013 9:18 AM by Eric Benway | |
| - | |
| - added JFR_CORK_RETR_Wheat_CV.pdf on Aug 7, 2013 9:18 AM by Eric Benway | |
| Notes: 10/25: Reduced AT26-09 WHEAT cruise 7 days. New cruise dates Dec 7 - 23, 2013. This is a dual NDSF vehicle cruise. JASON and SENTRY. 15 DSL personnel with 19 scince personnel. | |
| - -changed This is a dual NDSF vehicle cruise. JASON and SENTRY. 15 DSL personnel with 19 scince personnel. to 10/25: Reduced AT26-09 WHEAT cruise 7 days. New cruise dates Dec 7 - 23, 2013. This is a dual NDSF vehicle cruise. JASON and SENTRY. 15 DSL personnel with 19 scince personnel. on Nov 6, 2013 3:17 PM by Eric Benway | |
| - -changed This is a dual NDSF vehicle cruise. JASON and SENTRY. 15 DSL personnel with 19 scince personnel. to This is a dual NDSF vehicle cruise. JASON and SENTRY. 15 DSL personnel with 19 scince personnel. on Aug 7, 2013 9:19 AM by Eric Benway | |
| - -added This is a dual NDSF vehicle cruise. JASON and SENTRY. 15 DSL personnel with 19 scince personnel. on Aug 7, 2013 9:19 AM by Eric Benway | |
Funding |
| Funding Agency: NSF | |
| Grant or contract number: 1130146 |
Scientific Instrumentation for R/V Atlantis |
Shipboard Equipment | |||||||||||
| Bathymetry System 12 kHz, | |||||||||||
| Sippican XBT System (Mark 21), | |||||||||||
| Deionized Water System, | |||||||||||
| Relay Transponder for Wire Use, | |||||||||||
| 12 kHz Pinger for Wire Use, | |||||||||||
| Transponder Navigation - Sonardyne USBL, | |||||||||||
| Navigation - Heading, | |||||||||||
| Multibeam , | |||||||||||
| Fume Hood, | |||||||||||
| Navigation - Position | |||||||||||
| -added 12 kHz Pinger for Wire Use on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added Bathymetry System 12 kHz on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added Deionized Water System on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added Fume Hood on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added Multibeam on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added Navigation - Heading on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added Navigation - Position on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added Relay Transponder for Wire Use on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added Sippican XBT System (Mark 21) on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added Transponder Navigation - Sonardyne USBL on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
Shipboard Communication | |||||||||||
| Basic Internet access via HiSeasNet | |||||||||||
| -added Basic Internet access via HiSeasNet on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
CTD/Water Sampling | |||||||||||
| 911+ Rosette 24-position, 10-liter bottle Rosette with dual T/C sensors, | |||||||||||
| SBE43 oxygen sensor, | |||||||||||
| Wet Labs C*Star transmissometer (660nm wavelength) | |||||||||||
| -added 911+ Rosette 24-position, 10-liter bottle Rosette with dual T/C sensors on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added SBE43 oxygen sensor on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added Wet Labs C*Star transmissometer (660nm wavelength) on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
Critical CTD Sensors | |||||||||||
Sample Storage | |||||||||||
| Climate Controlled Walk-in, | |||||||||||
| Freezer -70°C 25 cu. ft., | |||||||||||
| Freezer -70°C 3.2 cu. ft. ea., | |||||||||||
| Refrigerator 8.6 cu. ft. | |||||||||||
| -added Climate Controlled Walk-in on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added Freezer -70°C 25 cu. ft. on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added Freezer -70°C 3.2 cu. ft. ea. on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added Refrigerator 8.6 cu. ft. on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| Storage Notes: We will probably want both walk in refirgoration units at 4degrees C. Often one is at 4C and the other at -20C. We will probably want both set to 4C | |||||||||||
| - added We will probably want both walk in refirgoration units at 4degrees C. Often one is at 4C and the other at -20C. We will probably want both set to 4C on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
Navigation | |||||||||||
| Will you be using Long Base Line (LBL) navigation? | no | ||||||||||
| - added no on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| How many nets? | null | ||||||||||
| How many tansponders? | null | ||||||||||
| Will you be using Ultra-short baseline (USBL) navigation? | no | ||||||||||
| - added no on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
Navigation | |||||||||||
| GPS, | |||||||||||
| USBL | |||||||||||
| -added GPS on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added USBL on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| Navigation Notes: We need navigation for Jason, Sentry, adn for elevators. Note that depths of the CORKS are ~4500m | |||||||||||
| - added We need navigation for Jason, Sentry, adn for elevators. Note that depths of the CORKS are ~4500m on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
Winches | |||||||||||
| CTD Winch with .322" Electro-mechanical wire, | |||||||||||
| Trawl Winch with .681 fiber optic | |||||||||||
| -added CTD Winch with .322" Electro-mechanical wire on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added Trawl Winch with .681 fiber optic on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| Winch Notes: We will conduct a few CTDs and need the fiber wire for Jason II | |||||||||||
| - added We will conduct a few CTDs and need the fiber wire for Jason II on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
Wire use and application | |||||||||||
| Trawl Winch with .681 fiber optic, | |||||||||||
| CTD Winch with .322" Electro-mechanical wire | |||||||||||
| -added CTD Winch with .322" Electro-mechanical wire on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added Trawl Winch with .681 fiber optic on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| Winch Notes: We will conduct a few CTDs and need the fiber wire for Jason II | |||||||||||
| - added We will conduct a few CTDs and need the fiber wire for Jason II on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
Standard Oceanographic Cables | |||||||||||
| |||||||||||
Portable Vans | |||||||||||
| Chemical Storage Van, | |||||||||||
| Isotope Van | |||||||||||
| -added Chemical Storage Van on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| -added Isotope Van on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
Specialized Deck Equipment | |||||||||||
| |||||||||||
Over the Side Equipment | |||||||||||
| Will you be bringing any equipment (winches, blocks, etc.) that lowers instruments over the side? | no | ||||||||||
| - removed answer | |||||||||||
| - added We should discuss teh Plasma winch, but I do not think that we will need it. on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
Special Requirements | |||||||||||
| |||||||||||
Additional Cruise Items/Activities | |||||||||||
| Explosive Devices: | no | ||||||||||
| Portable Air Compressors: | no | ||||||||||
| Flammable Gases: | no | ||||||||||
| Small Boat Operations: | no | ||||||||||
| SCUBA Diving Operations: | no | ||||||||||
Hazardous Material | |||||||||||
| Will hazardous material be utilized? | yes | ||||||||||
| - added yes on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| Describe deployment method and quantity: | |||||||||||
Radioactive Material | |||||||||||
| Radioiosotopes: | no | ||||||||||
Additional Information | |||||||||||
| Is night time work anticipated on this cruise? | no | ||||||||||
| - added no on Aug 7, 2013 9:16 AM by Eric Benway | |||||||||||
| Specialized tech support (Seabeam, coring, other): | |||||||||||
| Other required equipment and special needs: | |||||||||||
Scientific Instrumentation for HOV Jason |
Site Survey | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Will you provide detailed charts of the work area(s)? | yes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - added yes on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| If no, willl you need R/V Atlantis to generate maps of the work area(s)? | no | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - added no on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Will you need post-dive maps of the work area generated? | no | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - added no on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Navigation | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Will you be using Long Base Line (LBL) navigation? | no | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - added no on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| How many nets? | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| How many tansponders? | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Will you be using Ultra-short baseline (USBL) navigation? | yes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - added yes on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Will you be using Doppler/GPS navigation? | no | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - added yes on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| What type of samples do you expect to collect? | We want the low temperature probe is you have one. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - added We want the low temperature probe is you have one. on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Elevators | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Will you be using elevators to transport samples to the surface? | yes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - changed from | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - added no on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| If yes, how many would you anticipate? | 10 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - added 10 on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cameras & Video | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Video & Photo data | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| -added Video & Photo data on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Science Supplied Equipment | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Are you supplying equipment to be used on HOV Jason | yes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - added yes on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Has this equipment been used on Jason before? | yes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - added yes on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Please give a brief description of the equipment, its intended purpose, the cruise # it was last used on if any and its deployment method.
Heat flow probe CORK pressure download connector Flow meter LED communicator | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - added Heat flow probe CORK pressure download connector Flow meter LED communicator on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Does this equipment use an external pressure housing? | yes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - added yes on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| If yes, what is the pressure rating? | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| and test pressure? | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Has the pressure housing been tested per Alvin Pressure Test requirements? | yes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - added yes on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Pressure housing schematic with dimensions and include air and water weights.
»Initial_basket_configuration.pptx »Dorado_things_we_need_.xls »jason_initial_dive_plan_for_CR__CORKs_2013.xls - added jason_initial_dive_plan_for_CR__CORKs_2013.xls on Aug 8, 2013 11:19 AM by Eric Benway - added Dorado_things_we_need_.xls on Aug 8, 2013 11:19 AM by Eric Benway - added Initial_basket_configuration.pptx on Aug 8, 2013 11:20 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Does the equipment have an associated computer or control panel for remote operation from the personnel sphere? | yes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - added yes on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Air weight of this equipment? | 10 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| - added 10 on Aug 7, 2013 9:16 AM by Eric Benway | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Water weight of this equipment? | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Scientific Instrumentation for AUV Sentry |
Site Survey | |
| Will you provide detailed charts of the work area(s)? | yes |
| - added yes on Aug 7, 2013 9:16 AM by Eric Benway | |
| If no, willl you need R/V Atlantis to generate maps of the work area(s)? | yes |
| - added yes on Aug 7, 2013 9:16 AM by Eric Benway | |
| Will you need post-dive maps of the work area generated? | no |
| - added no on Aug 7, 2013 9:16 AM by Eric Benway | |
Navigation | |
| Will you be using Long Base Line (LBL) navigation? | no |
| - added no on Aug 7, 2013 9:16 AM by Eric Benway | |
| How many nets? | 0 |
| How many tansponders? | 0 |
| Will you be using Ultra-short baseline (USBL) navigation? | yes |
| - added yes on Aug 7, 2013 9:16 AM by Eric Benway | |
| Will you be using Doppler/GPS navigation? | yes |
| - added yes on Aug 7, 2013 9:16 AM by Eric Benway | |
| - added fluids, sediment (push cores), heat flow, rocks (bio box). clams, chimney?, flow meter 9we will bring) on Aug 7, 2013 9:16 AM by Eric Benway | |
Science Supplied Equipment | |
| Are you supplying equipment to be used on HOV AbeSentry | no |
| - added no on Aug 7, 2013 9:16 AM by Eric Benway | |
| Has this equipment been used on AbeSentry before? | no |
| - added no on Aug 7, 2013 9:16 AM by Eric Benway | |
| Please give a brief description of the equipment, its intended purpose, the cruise # it was last used on if any and its deployment method. | |
| Does this equipment use an external pressure housing? | no |
| - added no on Aug 7, 2013 9:16 AM by Eric Benway | |
| Has the pressure case been tested to the anticipated depth of deployment?& | no |
| - added no on Aug 7, 2013 9:16 AM by Eric Benway | |
| Pressure housing schematic with dimensions and include air and water weights. | |
| Air weight of this equipment? | null|
| Water weight of this equipment? | null|
| Does the equipment require data or a power interface from the vehicle? | no |
| Does the equipment meet the electrical requirements of the Sentry User Manual? | no |
| - added no on Aug 7, 2013 9:16 AM by Eric Benway | |
| -added Video & Photo data on Aug 7, 2013 9:16 AM by Eric Benway | |
Additional Information | |
| Brief operations description or comments: The plan is to have jason II on the seafloor at all times and send down push cores, fluid samplers, and bio boxes as needed. Also Sentry will be "mowing the lawn" while Jason is on the seafloor. We will ahve daily meetings at noon to lay out the plan for the follong day based oon elevator and sentry needs. Then we will go to the CORKS to download pressure data, recover an instrument sting, seal up the borehole witht he instruemnt string, collect fluids and monitor flow rate. | |
| - added The plan is to have jason II on the seafloor at all times and send down push cores, fluid samplers, and bio boxes as needed. Also Sentry will be "mowing the lawn" while Jason is on the seafloor. We will ahve daily meetings at noon to lay out the plan for the follong day based oon elevator and sentry needs. Then we will go to the CORKS to download pressure data, recover an instrument sting, seal up the borehole witht he instruemnt string, collect fluids and monitor flow rate. on Aug 7, 2013 9:16 AM by Eric Benway | |
Checklist & Notes |
Checklist | |
| U.S. Customs Form: | no |
| - changed from | |
| - added yes on Aug 7, 2013 9:33 AM by Eric Benway | |
| Diplomatic Clearance: | yes |
| - added yes on Aug 7, 2013 9:33 AM by Eric Benway | |
| Date Submitted: | |
| - added Jul 11, 2013 on Aug 7, 2013 9:33 AM by Eric Benway | |
| Date Approved: | |
| - added Nov 27, 2013 on Dec 10, 2013 12:28 PM by Eric Benway | |
| Agent Information: | |
Pre Load in San Francisco CA.October 20, 2014 Costa Rica Master R/V ATLANTIS | |
- changed from Pre Load in San Diego CA:Oct NOV 21, 2013; Master R/V ATLANTIS Contact: Tom Jenkins Costa Rica Master R/V ATLANTIS Pre Load in San Francisco CA.October 20, 2014 Costa Rica Master R/V ATLANTIS | |
- changed from Pre Load in San Diego CA:Oct NOV 15, 2013; Master R/V ATLANTIS Contact: Tom Jenkins Costa Rica Master R/V ATLANTIS Pre Load in San Diego CA:Oct NOV 21, 2013; Master R/V ATLANTIS Contact: Tom Jenkins Costa Rica Master R/V ATLANTIS | |
- changed from Pre Load in San Diego CA:Oct NOV 21, 2013; Master R/V ATLANTIS Contact: Tom Jenkins Costa Rica Master R/V ATLANTIS Pre Load in San Diego CA:Oct NOV 15, 2013; Master R/V ATLANTIS Contact: Tom Jenkins Costa Rica Master R/V ATLANTIS | |
- changed from Pre Load in San Diego CA:Oct NOV 15, 2013; Master R/V ATLANTIS Contact: Tom Jenkins Costa Rica Master R/V ATLANTIS Pre Load in San Diego CA:Oct NOV 21, 2013; Master R/V ATLANTIS Contact: Tom Jenkins Costa Rica Master R/V ATLANTIS | |
- added Pre Load in San Diego CA:Oct NOV 15, 2013; Master R/V ATLANTIS Contact: Tom Jenkins Costa Rica Master R/V ATLANTIS | |
| Countries: | |
| Costa Rica | |
| - changed from Embark Jason, Sentry and Science teams. 3 days mob to set up. | |
| - changed from Embark Jason, Sentry and Science teams. 2 days mob to set up. Embark Jason, Sentry and Science teams. 3 days mob to set up. on Dec 10, 2013 12:32 PM by Eric Benway | |
| - added Deadhead transit from San Diego CA. to Puntarenas Costa Rica. Embark Jason, Sentry and Science teams. 2 days mob to set up. on Aug 7, 2013 9:33 AM by Eric Benway | |
| Notes: | |
| US Customs form #4455 (Certificate of Documentation) are due to Eric Benway by Oct 20 th During pre loading in San Fransisco CA. | |
| - changed from ALL PAPERWORK SCANNED COPIES TO BE SENT TO ERIC BENWAY at ebenway@whoi.edu. | |
| - changed from ALL PAPERWORK SCANNED COPIES TO BE SENT TO ERIC BENWAY at ebenway@whoi.edu. ALL PAPERWORK SCANNED COPIES TO BE SENT TO ERIC BENWAY at ebenway@whoi.edu. on Dec 10, 2013 12:32 PM by Eric Benway | |
| - changed from ALL PAPERWORK SCANNED COPIES TO BE SENT TO ERIC BENWAY at ebenway@whoi.edu. ALL PAPERWORK SCANNED COPIES TO BE SENT TO ERIC BENWAY at ebenway@whoi.edu. on Aug 7, 2013 9:33 AM by Eric Benway | |
| - changed from ALL PAPERWORK SCANNED COPIES TO BE SENT TO ERIC BENWAY at ebenway@whoi.edu. ALL PAPERWORK SCANNED COPIES TO BE SENT TO ERIC BENWAY at ebenway@whoi.edu. on Dec 10, 2013 12:28 PM by Eric Benway | |
| - added ALL CUSTOMS PAPERWORK DUE TO MASTER RV ATLANTIS NO LATER THAN 4pm NOV 14 (Thursday). ALL PAPERWORK SCANNED COPIES TO BE SENT TO ERIC BENWAY at ebenway@whoi.edu. on Aug 7, 2013 9:33 AM by Eric Benway | |
| Isotope Use Approval: | no |
| - changed from | |
| - changed from | |
| - changed from | |
| - added yes on Aug 7, 2013 9:33 AM by Eric Benway | |
| Isotope Notes: | |
| - removed answer | |
| - added none being used./ on Dec 10, 2013 12:32 PM by Eric Benway | |
| - removed answer | |
| - added none being used./ on Dec 10, 2013 12:28 PM by Eric Benway | |
| SCUBA Diving: | no |
| - added no on Aug 7, 2013 9:33 AM by Eric Benway | |
Checklist | |
| SSSG Tech: | |
| Catie Graver & Dave Simms | |
| - changed from | |
| - added Allison Heater, Catie Graver on Aug 7, 2013 9:33 AM by Eric Benway | |
| Pre Loading in San Fran CA Oct 20th. Mobilization November 28 & 29 in Puntarenas CR. Deombe in Puntarenas CR Dec 13th. | |
| - changed from * NEW DATES NOV 21-22. Off load in USA will be first port at end of operating year (later 2013 or early 2014). PORT WILL BE NEW ORLEANS LA. (Dec 6, 2013 - eb). SENTRY off load will take place by crane on DECEMBER 23. Science, and Sentry team will disembark Puntarenas CR on Dec 24. Jason team will swap personnel and get ready for Sievert cruise Dec 29. Mobilization November 28 & 29 in Puntarenas CR. Deombe in Puntarenas CR Dec 13th. on May 22, 2014 9:57 AM by Eric Benway | |
| - changed from Off load in USA will be first port at end of operating year (later 2013 or early 2014). Gulfport MS is most likely port. JASON and SENTRY off load will take place by crane on DECEMBER 24. Science, Jason and Sentry teams will disembark Puntarenas CR on Dec 24. * NEW DATES NOV 21-22. Off load in USA will be first port at end of operating year (later 2013 or early 2014). PORT WILL BE NEW ORLEANS LA. (Dec 6, 2013 - eb). SENTRY off load will take place by crane on DECEMBER 23. Science, and Sentry team will disembark Puntarenas CR on Dec 24. Jason team will swap personnel and get ready for Sievert cruise Dec 29. on Dec 10, 2013 12:32 PM by Eric Benway | |
| - changed from * NEW DATES NOV 21-22. Off load in USA will be first port at end of operating year (later 2013 or early 2014). PORT WILL BE NEW ORLEANS LA. (Dec 6, 2013 - eb). SENTRY off load will take place by crane on DECEMBER 23. Science, and Sentry team will disembark Puntarenas CR on Dec 24. Jason team will swap personnel and get ready for Sievert cruise Dec 29. Off load in USA will be first port at end of operating year (later 2013 or early 2014). Gulfport MS is most likely port. JASON and SENTRY off load will take place by crane on DECEMBER 24. Science, Jason and Sentry teams will disembark Puntarenas CR on Dec 24. on Aug 7, 2013 9:33 AM by Eric Benway | |
| - changed from Off load in USA will be first port at end of operating year (later 2013 or early 2014). Gulfport MS is most likely port. JASON and SENTRY off load will take place by crane on DECEMBER 24. Science, Jason and Sentry teams will disembark Puntarenas CR on Dec 24. * NEW DATES NOV 21-22. Off load in USA will be first port at end of operating year (later 2013 or early 2014). PORT WILL BE NEW ORLEANS LA. (Dec 6, 2013 - eb). SENTRY off load will take place by crane on DECEMBER 23. Science, and Sentry team will disembark Puntarenas CR on Dec 24. Jason team will swap personnel and get ready for Sievert cruise Dec 29. on Dec 10, 2013 12:28 PM by Eric Benway | |
| - added Pre loading in San Diego USA NOV 14 and 15. 10th Avenue pier. Off load in USA will be first port at end of operating year (later 2013 or early 2014). Gulfport MS is most likely port. JASON and SENTRY off load will take place by crane on DECEMBER 24. Science, Jason and Sentry teams will disembark Puntarenas CR on Dec 24. on Aug 7, 2013 9:33 AM by Eric Benway | |
| - removed answer | |
| - changed from | |
| - changed from | |
| - changed from | |
| - added JASON and SENTRY off load will take place by crane on DECEMBER 24. on Aug 7, 2013 9:33 AM by Eric Benway | |