Woods Hole Oceanographic Institution

Cruise Planning Synopsis


view revisions

AR45 OOI Pioneer

Ship

RV Neil Armstrong

Cruise Party

Derek Buffitt: Principal Investigator
Organization Name US
+1 508 289 2607
dbuffitt@whoi.edu

Albert Plueddemann: Chief Scientist
Woods Hole Oceanographic Institution Clark 202A, MS#29 Woods Hole, Ma. USA 02543
+1 508 289 2789
aplueddemann@whoi.edu

Departure: Apr 17, 2020

Woods Hole

Arrival: May 7, 2020

Woods Hole

Operations Area

Continental shelf and slope south of New England
Lat/Lon: 40° 0.0′ N / 71° 0.0′ W
Depth Range: 60 / 600
Will the vessel be operating within 200 NM of a foreign country? N/A
Are visas or special travel documents required? no

Science Objectives

This is the 14th major infrastructure deployment and servicing cruise for the Pioneer Array of  the National Science Foundation’s Ocean Observatories Initiative (OOI). The Pioneer Array includes a network of moorings and autonomous robotic vehicles to monitor waters of the continental shelf and slope south of New England and, in particular, the shelfbreak front where nutrients and other properties are exchanged between the coast and the deep ocean. Data from the Pioneer Array is providing new insights into coastal ocean processes such as shelf/slope property exchange, air-sea heat exchange, carbon cycling, and ocean acidification that are important to the New England shelf, and to continental shelf ecosystems around the world. For further information, see http://www.oceanobservatories.org.

Science Activities

The Pioneer-14 cruise will consist of 2 legs with distinct objectives. The main objectives of Leg A are to deploy 5 Coastal Profiler Moorings (CPMs) and recover 7 CPMs. The main objectives of Leg B are to deploy and recover 3 Coastal Surface Moorings (CSMs), deploy and recover multilple gliders, and deploy 2 AUVs (singly or simultaneously) for ship-attended missions. Both legs will involve ancillary activities, including CTD casts with water sampling adjacent to moorings, gliders and AUVs, comparison of buoy and shipboard data, cross-shelf CTD surveys in the vicinity of the moored array, and surveys using shipboard sensors (ADCP, EK-80, thermosalinograph, multibeam) in the Pioneer moored array region.

Additional Info

Pre-cruise Planning Meeting: Teleconference/Visit WHOI
Meeting Notes: Most of us will be on site, but may still need telcon.
Media personnel on board: Writer, WHOI communications
Photo and video documentation.

Stations:

Supporting documentation:

»Pioneer_CTD_HAZMAT_list_with_MSDS.pdf
»Pioneer_battery_HAZMAT_list_with_MSDS.pdf
»Surface_Buoy_Recovery_Procedure_with_MSDS.pdf
»Pioneer14_waypoints_v1.xlsx
»Deck_Plan_Pioneer_14_Leg_1.pdf
»Deck_Plan_Pioneer_14_Leg_2.pdf

Funding

Funding Agency: NSF
Grant or contract number: OOI CGSN

Scientific Instrumentation for R/V Armstrong

Other Science Vans:

Shipboard Equipment

12 kHz Pinger for Wire Use
A-Frame
ADCP 150 kHz
ADCP 300 kHz
Bathymetry System 12 kHz
Crane
Deionized Water System
Dynamic Positioning System
EK80 Sonar
EM710 MkII (40 to 100 kHz) Multibeam Echosounder
Fume Hood
K-Synch System
Science Underway Seawater System
WAMOS
Shipboard Equipment Notes: 12 kHz pinger only in the unlikely event of dragging.

Shipboard Communication

Basic Internet access via HiSeasNet
Is there a need to receive data from shore on a regular basis?
Is there a need to transfer data to shore on a regular basis?
Shipboard Communication Notes: Monitoring of mooring function by connecting to shore-side servers has been found to require more that the normal captive portal data allocation.

CTD/Water Sampling

911+ Rosette 24-position, 10-liter bottle Rosette with dual T/C sensors
Biospherical underwater PAR (1000m depth limit) with reference Surface PAR
SBE43 oxygen sensor
Wet Labs C*Star transmissometer (660nm wavelength)
Wet Labs FLNTURTD Combination Flourometer and Turbidity Sensor

Critical CTD Sensors

Hydrographic Analysis Equipment

Dissolved Oxygen Titration System (Brinkmann Titrator)
Oxygen Sample Bottles (available in 150 ml sizes)
Salinometer
Salt Bottles (2 cases of 125 ml provided)

MET Sensors

Air temperature
Barometric Pressure
Long Wave Solar Radiation
Precipitation
Relative Humidity
Short Wave Solar Radiation
Wind speed and direction

Sample Storage

Freezer -70°C 25 cu. ft.
Scientific Walk-in Refrigerator
Scientific Walk-in Freezer
Storage Notes: We have in the past used the walk-in refrigerator for storage (with cooling off).

Navigation

Will you be using Long Base Line (LBL) navigation? no
How many nets? null
How many tansponders? null
Will you be using Ultra-short baseline (USBL) navigation?no

Navigation

GPS
Navigation Notes: Serial GPS feed for Chief Sci laptop. Hull modem for AUV.

Winches

Other Portable Winch
Trawl Winch with 9/16th trawl wire
UNOLS Winch Pool
Winch Notes: Science party will reserve split-drum TSE winch. Sciency party will supply Lantec heavy-lift winch, and ROV winch. Trawl winch used for anchor lowering. 

Wire use and application

CTD Winch with .322" Electro-mechanical wire
Trawl Winch with 9/16th trawl wire
Winch Notes: Standard CTD casts with CTD winch, anchor lowering with trawl wire, possible dragging operations with trawl wire.

Standard Oceanographic Cables

Slip ring required? no
Non-standard wire required? no
Traction winch required? no
Science Van 1
Type/size: Flat rack Location: above storage van
Water: no Power:no
Science Van 2
Type/size: Flat rack Location: above rigging van
Water: no Power:yes
Science Van 3
Type/size: Storage van Location: Port side outboard, main deck
Water: no Power:no
Science Van 4
Type/size: Rigging van Location: Port side inboard, main deck
Water: no Power:yes

Specialized Deck Equipment

Mooring Deployment/Recovery Equipment Required: no Type: 
Cruise Specific Science Winch Required: no Type: 
Nets Required: no Type: 

Over the Side Equipment

Will you be bringing any equipment (winches, blocks, etc.) that lowers instruments over the side? yes Details: TSE winch, for mooring deployment and recovery; Lantec winch, for anchor deployment and recovery; air tuggers for tag lines.

Special Requirements

Elecrical Power: yes Identify TSE, Rigging van: 440 3ph; Lantec: 480 160 A
Equipment Handling: no Identify: 
Inter/intraship Communications: no Identify: 
Science Stowage: no Identify: 
Water: no Identify: 

Additional Cruise Items/Activities

Explosive Devices:no Portable Air Compressors:no Flammable Gases:no Small Boat Operations:yes SCUBA Diving Operations:no

Hazardous Material

Will hazardous material be utilized?yesDescribe deployment method and quantity:

Radioactive Material

Radioiosotopes:no

Additional Information

Is night time work anticipated on this cruise?yesSpecialized tech support (Seabeam, coring, other):
Other required equipment and special needs:
AUV handling equipment (SOO-LARS) to be installed on starboard aft arm for Leg B.

Checklist & Notes

Checklist

U.S. Customs Form: no
Diplomatic Clearance: no
Date Submitted:
Date Approved:
Agent Information:
Countries:
Notes:
Isotope Use Approval: no
Isotope Notes:
SCUBA Diving: no

Checklist

SSSG Tech: